AG3 series The AG3 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The signal conditioning IC does not have A/D and D/A converter in a gain amplifier. Therefore the AG3 series can provide full analog amplified and temperature compensated output. Moreover the amplification circuit is designed with low noise output. As a unique function, the AG3 series has Single Point Pressure Threshold Detection. Analog output and threshold voltage are supplied to an internal comparator that compares two voltages and outputs a comparison result as digital output. Contact us here for inquiries. contact us Features Device Name Cod General Specifications Electrical Characteristics Features Non-digitally amplified and temperature compensated analog output Single point pressure threshold detection High accuracy ±1.5 %FS / 0 to +60 °C Supply voltage 3.0, 3.3 & 5.0 Vdc Miniature 10.3 mm x 7 mm SMT package 3 mm port and 6 mm port available Package compatible with Fujikura's XFGM integrated pressure sensor Customization or modification available Device Name Cod General Specifications Item Sensor Code Unit AG30* AG31* AG32* Supply Voltage 5.0±0.25 3.3±0.165 3.0±0.15 Vdc Type of Pressure Gauge pressure Pressure Media Non-corrosive gases Compensated Temperature 0 to +60 °C Operating Temperature -40 to +105 °C Storage Temperature -40 to +105 °C Operating Humidity 30 to 85 (non-condensing) %RH Storage Humidity 30 to 85 (non-condensing) %RH Electrical Characteristics Sensor Code Item Unit AG30*VDD = 5.0 Vdc Offset Voltage 0.2±0.0675 V Full Scale Voltage 4.7±0.0675 V Span Voltage 4.5 V Accuracy (0 to 60 °C) ±1.5 %FS Supply Current 6 (Max.) mAdc AG31*VDD = 3.3 Vdc Offset Voltage 0.3±0.0405 V Full Scale Voltage 3.0±0.0405 V Span Voltage 2.7 V Accuracy (0 to 60 °C) ±1.5 %FS Supply Current 5 (Max.) mAdc AG32*VDD = 3.0 Vdc Offset Voltage 0.15±0.0540 V Full Scale Voltage 2.85±0.0540 V Span Voltage 2.7 V Accuracy (0 to 60 °C) ±2.0 %FS Supply Current 5 (Max.) mAdc Common Response Time 2 msec. Load Resistor 9.5 (Min.) kΩ Load Capacitance 50 (Max.) pF Contact us here for inquiries. contact us datasheet (PDF577KB)
