press release
sales of new large-diameter Optical Fiber cleaver "CT105+ series"
Fujikura Ltd.
April 26, 2021
Fujikura Ltd. (Director, President and CEO Masahiko Ito) has recently begun sales of a new large-diameter Optical Fiber cleaver, the "CT105+ Series."
Large-diameter Optical Fiber are primarily used in applications such as manufacturing of fiber lasers, which require high-power optical energy transmission.
In order to obtain a good cleave angle for large-diameter Optical Fiber, it is necessary to set the optimal Optical Fiber gripping force and tension when cleaving. If the gripping force is too strong, Optical Fiber coating may deform, which may affect the transmission characteristics of optical energy. On the other hand, if the gripping force is too weak, Optical Fiber may slip due to the tension when cleaving, and a good cleave angle may not be obtained.
The new large-diameter Optical Fiber cleaver "CT105+ series" is equipped with a function that automatically detects the optimal Optical Fiber gripping force. This makes it possible to set the Optical Fiber gripping force with higher accuracy in a shorter time than before. In addition, the design of the cleaving blade has been revised, and the number of times that Optical Fiber can be cleaved has been significantly increased.
Please try the "CT105+ Series" large-diameter Optical Fiber cleaver, which can be application to a variety of Optical Fiber, including large-diameter fibers, polygonal fibers, photonic crystal fibers, and capillaries (hollow glass tubes).
For more details, please refer to the URL below.
[https://www.fusionslicer.fujikura.com/jp/ 】
|
© 2021 Fujikura Ltd.