Fujikura Ltd.

  1. Home
  2. Products
  3. Overview of Optical Camera Link Cable Assemblies

PRODUCTS

Overview of Optical Camera Link Cable Assemblies

 

Contact us here for inquiries.
contact us

Features

  • Active Optical Cable assemblies for connecting between Camera Link digtital cameras and grabber boards
  • Enables 100 m transmission without repeater/extender
  • Directly connected to electrical connector of camera and grabber board
  • Immune to external noise
  • Fiber/copper hybrid cable enables PoCL, serial communication (SerTC, SerTFG), and camera control signals (CC1 to CC4)
  • Supports standard cable for fixed installation and high flex cycles cable for continuous motion
  • Supports MDR straight plug and SDR straight plug

Specifications

Parameters to Define Product Specifications
Camera Link Interface Configuration Base Config.
Medium Config.
Full Config. 8tap
Connector Type MDR MDR
SDR sdr
Power Supply
to This Cable Assembly
PoCL PoCL
non-PoCL
Supplied at Grabber Board Side
Plug
non-PoCL
non-PoCL
Supplied at Camera Side
Plug
non-PoCLSupplied at Camera Side Plug
Cable Type Standard Cable
for Fixed Installation
Standard Cable for Fixed Installation
High Flex Cycles Cable
for Continuous Motion

Product Selection Chart
Camera Link Configuration Transmission Distance Power Supply to Camera Environments of Installed Cable Product Type Product Number
Base Configuration 30 m or more Supply Power from Grabber Board over Cable (PoCL) Fixed after installed No products available
Continuous motion after installed No products available
30 m or less Supply Power from Grabber Board over Cable (PoCL) Fixed after installed PoCL Base Fixed Cable FOCLBP-xxS-yPS-zP
Continuous motion after installed PoCL Base High Flex Cycles Cable FOCLBP-xxD-yPS-zP
100 m or less Supply Power at Electrical Connector of Camera Fixed after installed Non-PoCL Base Fixed Cable Supply Power at Grabber-side Plug:
FOCLBN-xxS-yPS-zP
Supply Power at Camera-side Plug:
FOCLBN-xxS-yPS3-zP
Continuous motion after installed Non-PoCL Base High Flex Cycles Cable Supply Power at Grabber-side Plug:
FOCLBN-xxD-yPS-zP
Supply Power at Camera-side Plug:
FOCLBN-xxD-yPS3-zP
Medium Configuration 30 m or less Supply Power from Grabber Board over Cable (PoCL) Fixed after installed Contact us for the availability
Continuous motion after installed
100 m or less Supply Power at Electrical Connector of Camera Fixed after installed Non-PoCL Base Fixed Cable Supply Power at Grabber-side Plug:
FOCLBN-xxS-yPS-zP
Supply Power at Camera-side Plug:
FOCLBN-xxS-yPS3-zP
Continuous motion after installed Non-PoCL Base High Flex Cycles Cable Supply Power at Grabber-side Plug:
FOCLBN-xxD-yPS-zP
Supply Power at Camera-side Plug:
FOCLBN-xxD-yPS3-zP
Full Configuration
(8 bit - 8 tap)
[Note 1]
30 m or less Supply Power from Grabber Board over Cable (PoCL) Fixed after installed Contact us for the availability
Continuous motion after installed
100 m or less Supply Power at Electrical Connector of Camera Fixed after installed Non-PoCL Full Fixed Cable Supply Power at Grabber-side Plug:
FOCLFN-xxS-yPS-zP
Supply Power at Camera-side Plug:
FOCLFN-xxS-yPS3-zP
Continuous motion after installed Non-PoCL Full High Flex Cycles Cable Supply Power at Grabber-side Plug:
FOCLFN-xxD-yPS-zP
Supply Power at Camera-side Plug:
FOCLFN-xxD-yPS3-zP

Note 1: Needs to use two cable assemblies, one is Base cable connected to Base-side connector of camera and the other is Full cable connected to Full-side connector of camera.

General Specificaitons
Parameters Specifications
Configurations Base, Medium and Full (8 bit - 8 tap)
Camera Clock 20 to 85 MHz
Connector MDR and SDR
Transmission Distance up to 100 m (up to 30 m for PoCL)
Cable Type Standard Cable for Fixed Installation
High Flex Cycles Cable for Continuous Motion
Minimum Bending Radius 30 mm (Inner Radius)
Power Supply Voltage +12 V DC
Operating Temperature -5 to 45 deg. C
Operating Humidity 10 to 90 % (RH)

Reference Documents

Contact us here for inquiries.

contact us

PAGE TOP