Fujikura Ltd.

  1. Home
  2. Products
  3. Optical Camera Link Cable Assembly for Base/Medium Configuration, Non-PoCL, High Flex Cycles Cable

PRODUCTS

Optical Camera Link Cable Assembly for Base/Medium Configuration, Non-PoCL, High Flex Cycles Cable

 

Contact us here for inquiries.
contact us

Features

  • Supports Camera Link Base/Medium Configuration at 85 MHz
  • Needs to supply power from outside for operating the cable assemblies
  • High flex cycles cable suitable for continuous motion
  • 10M cycles or more (Inner radius: 50 mm) of flex life test results
  • Maximum transmission distance up to 100 m

Specifications

Parameters Specifications
Product Number FOCLBN-xxD Series
Configuration Base、Medium
Camera Clock 20 to 85 MHz
Transmission Distance up to 100 m
Cable Type High flex cycles cable for continuous motion
Connector MDR straight plug
SDR straight plug
Cable Outer Diameter 8.9 mm
Minimum Bending Radius 30 mm (Inner Radius)
Flex LIfe
(Slide Bending)
10M cycles or more (Inner radius: 50 mm) [Note 1]
Power Supply Voltage +12 V DC
Power Supply to Cable Need to supply power from power suppy wires at either grabber-side plug or camera-side plug. [Note 2]
(Need to specify the plug where power supply wires are connected when placing order)
Power Consumption 0.94 W (Typ) [Note 3]

Note 1: This value is the results demonstrated by our flex life test and is not guaranteed.
Note 2: If you need to use a PoCL camera, please select FOCLBP-xxD series.
Note 3: This value is specified under steady state current. We recommend to consider the inrush current when designing your system.
We can lend a samlple of our products for you to evaluate the operation of it with your system before purchasing.

Flex Life Test Results

 

Ordering Information

FOCL[B][N]-[xx][D]-[y]PS[#]-[z]P
Example:  FOCLBN-20D-SPS-MP

Symbols Parameters Descriptions
[B] Product Type B: Cable connected to Base-side connector
[N] Power Supply to Cable N: non-PoCL
[xx] Cable Length (unit: m) xx: 01, 03, 05, 07, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, A0(=100 m)
[D] Cable Type D: High flex cycles cable for continuous motion
[y] Connector Type of Camera-side plug M: MDR straight plug
S: SDR straight plug
[#] Location of Power Suply Wires Blank: Power supply wires are connected to grabber-side plug (standard)
3: Power supply wires are connected to camera-side plug
Example:
[M]PS: MDR Straight Plug, Power supply wires at grabber-side plug
[M]PS[3]: MDR Straight Plug, Power supply wires at camerar-side plug
[S]PS: SDR Straight Plug, Power supply wires at grabber-side plug
[S]PS[3]: SDR Straight Plug, Power supply wires at camerar-side plug
[z] Connector Type of Grabber-side plug M: MDR straight plug
S: SDR straight plug

Reference Documents

Contact us here for inquiries.

contact us

PAGE TOP