| ITEM |
SPECIFICATIONS |
| Applicable type of fibers |
SM(ITU-T G.652 & G.657), MM(ITU-T G.651), DS(ITU -T G.653), NZDS(ITU-T G.655) |
| Fiber count |
Single, 2, 4, 5, 6, 8, 10 and 12 |
Applicable fiber dimensions |
Ribbon : Cladding diameter 125µm, Ribbon fiber thickness 0.25 to 0.4µm
Single : Cladding diameter 125µm, Coating diameter 250mm and 900µm |
| Fiber cleaved length |
10mm |
| Splicing modes |
Total 100 modes |
| Typical splice loss |
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. (Measured by cut-back method relevant to ITU-T standard). |
| Return loss |
>>60dB |
| Splicing time |
Typical 20sec. with standard SM (ITU-T G.652) |
| Splice loss estimate |
Available |
| Tube heater / heating time |
Built-in tube heater with 30 heating modes. / Typical 40sec with Fujikura FP-04T and 50sec with FP-05. |
| Applicable protection sleeve |
60mm, 40mm and Fujikura FPS01 series |
| Storage of splice result |
The last 2000 results to be stored in the internal memory. |
| Tension test |
1.96 to 2.25N |
| Operating condition |
0 to 3660m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively. |
| Storage condition |
0 to 95%RH and -40 to 80 degC respectively.
Battery : -20 to 30 degC for long term. |
| Dimensions |
136W × 161D × 143H [mm] excluding rubber foot. |
| Weight |
2.1kg with AC adaptor ADC-13, 2.5kg with battery BTR-08. |
| Viewing method and display |
Two CMOS cameras and 4.1" color LCD monitor. |
| Fiber view and magnification |
X / Y (35X magnification), or both X and Y simultaneously (35X magnification). Changeable 35X to 90X. |
| No.of splice cycles with battery |
Typical 90 cycles (splice / tube heat) with BTR-08. |
| Power supply |
Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08. |
| Electrode life |
1000 arc-discharges |
| Terminals |
USB 1.1 (USB-MiniB type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02/03 or SH-8R/C power supply. |
